The grommet kit is used to repair torn out grommets or insert additional grommets to your banners.
Grommet Kit Includes
• 20 Grommets ( 20 Washers and 20 Grommets )
• 1 Cutting Tool
• 1 Insert Punch
• 1 Setting Die or Base
How To Use A Grommet Kit
- Always fold the material, creating a hem. Mark the location for the holes.
- Place a wood block under the material. Place the cutting tool over the mark and strike it with a wooden or plastic mallet.
- Place the grommet (post up) on the base. Center the hole in the material over the grommet.
- Place washer rounded side up over the grommet and material.
- Insert the punch into the tube. Tap the punch squarely with a hammer; rotate punch ¼ turn in between strikes until grommet and washer fit tightly to the material.